Abbaszadeh, H.
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
Abdoli, H.
Thermokinetic investigation of the oxidation of aluminum nitride powder [Volume 1, Issue 2, 2013, Pages 53-60]
Ahmad Pour, A.
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Alizadeh, Gelareh
Investigation of the effect of Ag doping on electrical and structural properties of Zn ferrite [Volume 1, Issue 2, 2013, Pages 1-7]
Asghari, Z.
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
Asgharpour, Somaye
Synthesis of Al2O3 – ZrO2 nanocomposite By Mechanical Activated Self-propagating High-temperature Synthesis with thermal explosion mode [Volume 1, Issue 2, 2013, Pages 43-51]
Azimi, D.
The Effect of Deflocculants Type and SiC Content on the Properties of Al2O3-SiC Low-Cement Vibration Refractory Castables [Volume 1, Issue 2, 2013, Pages 79-86]
Azimi, J.
The Effect of Deflocculants Type and SiC Content on the Properties of Al2O3-SiC Low-Cement Vibration Refractory Castables [Volume 1, Issue 2, 2013, Pages 79-86]
B
Barounian, Mohammad Hasan
Effect of addition of functionalized nano fiberous Titania on mechanical properties and biocompatibility of light-cure polymeric dental cement based of poly hydroxyethylmethacrylate (PHEMA) [Volume 1, Issue 2, 2013, Pages 61-67]
Borji, S.
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
E
Ebrahimi- Kahrizsangi, Reza
Physical and Mechanical properties of a poly-3-hydroxybutyratecoated namocrystalline bioglass 45S5 scaffold for bone tissue engineering [Volume 1, Issue 2, 2013, Pages 87-96]
Edris, Hamed
Investigation on the effect of chemical composition of the nano particles bioactive glass on the bioactivity behavior in the SiO2-CaO-P2O5 system [Volume 1, Issue 1, 2012, Pages 35-42]
Edris, Hossain
Investigation on the effect of chemical composition of the nano particles bioactive glass on the bioactivity behavior in the SiO2-CaO-P2O5 system [Volume 1, Issue 1, 2012, Pages 35-42]
Emadi, R.
Effect of using phosphate bonds in alumina-spinel low cement castables [Volume 1, Issue 1, 2012, Pages 1-7]
Eskandari, Arvin
Nano Crystallites of Nickel Tungstate photocatalyst synthesized Via Polyol Method [Volume 1, Issue 2, 2013, Pages 37-42]
F
Farnoush, Hamid Reza
Thermokinetic investigation of the oxidation of aluminum nitride powder [Volume 1, Issue 2, 2013, Pages 53-60]
Fathi, Mohammad Hossein
Investigation on the effect of chemical composition of the nano particles bioactive glass on the bioactivity behavior in the SiO2-CaO-P2O5 system [Volume 1, Issue 1, 2012, Pages 35-42]
Foroughi, Mohammad Reza
Physical and Mechanical properties of a poly-3-hydroxybutyratecoated namocrystalline bioglass 45S5 scaffold for bone tissue engineering [Volume 1, Issue 2, 2013, Pages 87-96]
G
Ghadiri Dehkordi, B.
Numerical Prediction of Fluid-Elastic Instability in a Normal Triangular Tube Bundle [Volume 1, Issue 2, 2013, Pages 9-35]
Ghorbani, M.R.
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Goudarzi, Farnoosh
Nano Crystallites of Nickel Tungstate photocatalyst synthesized Via Polyol Method [Volume 1, Issue 2, 2013, Pages 37-42]
H
Haghighi Asl, A.
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Hesaraki, S.
Effect of addition of functionalized nano fiberous Titania on mechanical properties and biocompatibility of light-cure polymeric dental cement based of poly hydroxyethylmethacrylate (PHEMA) [Volume 1, Issue 2, 2013, Pages 61-67]
Houri Jafari, H.
Numerical Prediction of Fluid-Elastic Instability in a Normal Triangular Tube Bundle [Volume 1, Issue 2, 2013, Pages 9-35]
I
Irankhah, R.
MnCo2O4 coating on SUS 430 ferritic stainless steel by electrophoretic deposition for interconnect applications in solid oxide fuel cells. [Volume 1, Issue 1, 2012, Pages 43-49]
J
Jalilpour, M.
Nucleating Agents on Crystallization Behavior of Lithium Aluminosilicate (LAS) Glass–Ceramics [Volume 1, Issue 1, 2012, Pages 25-34]
K
Karbasi, Saeed
Physical and Mechanical properties of a poly-3-hydroxybutyratecoated namocrystalline bioglass 45S5 scaffold for bone tissue engineering [Volume 1, Issue 2, 2013, Pages 87-96]
Kazemzadeh, A.
Nano Crystallites of Nickel Tungstate photocatalyst synthesized Via Polyol Method [Volume 1, Issue 2, 2013, Pages 37-42]
L
Lotfi, S.
Investigation of Pozzolanic Effect of Micro Silica on light Weight Concretes [Volume 1, Issue 1, 2012, Pages 15-24]
M
Maghsoudipour, A.
MnCo2O4 coating on SUS 430 ferritic stainless steel by electrophoretic deposition for interconnect applications in solid oxide fuel cells. [Volume 1, Issue 1, 2012, Pages 43-49]
Memarian, Fatemeh
Investigation of the effect of Ag doping on electrical and structural properties of Zn ferrite [Volume 1, Issue 2, 2013, Pages 1-7]
Monshi, A.
Effect of using phosphate bonds in alumina-spinel low cement castables [Volume 1, Issue 1, 2012, Pages 1-7]
Monshi, Ahmad
Physical and Mechanical properties of a poly-3-hydroxybutyratecoated namocrystalline bioglass 45S5 scaffold for bone tissue engineering [Volume 1, Issue 2, 2013, Pages 87-96]
Montazeri, Mahboobeh
Physical and Mechanical properties of a poly-3-hydroxybutyratecoated namocrystalline bioglass 45S5 scaffold for bone tissue engineering [Volume 1, Issue 2, 2013, Pages 87-96]
Mostaed, Ali
Synthesis of Al-4.5wt%Cu/TiC Nanocomposite and Nanostructured Al-4.5wt%Cu Alloy via Mechanical Milling Process [Volume 1, Issue 1, 2012, Pages 9-14]
Mostaed, Ehsan
Synthesis of Al-4.5wt%Cu/TiC Nanocomposite and Nanostructured Al-4.5wt%Cu Alloy via Mechanical Milling Process [Volume 1, Issue 1, 2012, Pages 9-14]
Motiei Mehr, M.
Parameters Affecting the Mechanochemical Synthesis of
Ti-Al-Al2O3 Composites from Al and TiO2 powders [Volume 1, Issue 2, 2013, Pages 69-78]
N
Nemati, Z. A.
The Effect of Deflocculants Type and SiC Content on the Properties of Al2O3-SiC Low-Cement Vibration Refractory Castables [Volume 1, Issue 2, 2013, Pages 79-86]
O
Otroj, S.
The Effect of Deflocculants Type and SiC Content on the Properties of Al2O3-SiC Low-Cement Vibration Refractory Castables [Volume 1, Issue 2, 2013, Pages 79-86]
P
Paghandeh, M.
Effect of using phosphate bonds in alumina-spinel low cement castables [Volume 1, Issue 1, 2012, Pages 1-7]
R
Raissi Dehkordi, B.
MnCo2O4 coating on SUS 430 ferritic stainless steel by electrophoretic deposition for interconnect applications in solid oxide fuel cells. [Volume 1, Issue 1, 2012, Pages 43-49]
Ramezani, Niloufar
Investigation of the effect of Ag doping on electrical and structural properties of Zn ferrite [Volume 1, Issue 2, 2013, Pages 1-7]
Rezaie, Hamid Reza
Synthesis of Al-4.5wt%Cu/TiC Nanocomposite and Nanostructured Al-4.5wt%Cu Alloy via Mechanical Milling Process [Volume 1, Issue 1, 2012, Pages 9-14]
Rezvani, M.
Nucleating Agents on Crystallization Behavior of Lithium Aluminosilicate (LAS) Glass–Ceramics [Volume 1, Issue 1, 2012, Pages 25-34]
S
Sadrnezhaad, Seyed Khatiboleslam
Thermokinetic investigation of the oxidation of aluminum nitride powder [Volume 1, Issue 2, 2013, Pages 53-60]
Saghafian, Hassan
Synthesis of Al-4.5wt%Cu/TiC Nanocomposite and Nanostructured Al-4.5wt%Cu Alloy via Mechanical Milling Process [Volume 1, Issue 1, 2012, Pages 9-14]
Salahi, E.
Investigation of Pozzolanic Effect of Micro Silica on light Weight Concretes [Volume 1, Issue 1, 2012, Pages 15-24]
Sarraf Mamoori, R.
Determination of optimum process condition for synthesis of CaF2 nanopowder by precipitation method with experimental design of Taguchi's method [Volume 1, Issue 2, 2013, Pages 97-104]
Seyedin, Sh.
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
Shahali, E.
Determination of optimum process condition for synthesis of CaF2 nanopowder by precipitation method with experimental design of Taguchi's method [Volume 1, Issue 2, 2013, Pages 97-104]
Shahbaz Tehrani, Fatemeh
Investigation of the effect of Ag doping on electrical and structural properties of Zn ferrite [Volume 1, Issue 2, 2013, Pages 1-7]
Shahsavand, A.
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Shokuhfar, A.
Synthesis of Al-4.5wt%Cu/TiC Nanocomposite and Nanostructured Al-4.5wt%Cu Alloy via Mechanical Milling Process [Volume 1, Issue 1, 2012, Pages 9-14]
T
Tayebifard, Ali
Synthesis of Al2O3 – ZrO2 nanocomposite By Mechanical Activated Self-propagating High-temperature Synthesis with thermal explosion mode [Volume 1, Issue 2, 2013, Pages 43-51]
Tayebifard, S. A.
Production of AlTi porous bodies by SHS [Volume 1, Issue 1, 2012, Pages 51-57]
V
Vaezi, Mohammad Reza
Synthesis of Al2O3 – ZrO2 nanocomposite By Mechanical Activated Self-propagating High-temperature Synthesis with thermal explosion mode [Volume 1, Issue 2, 2013, Pages 43-51]
Y
Yazdani Rad, R.
Production of AlTi porous bodies by SHS [Volume 1, Issue 1, 2012, Pages 51-57]
Yazdani Rad, R.
Parameters Affecting the Mechanochemical Synthesis of
Ti-Al-Al2O3 Composites from Al and TiO2 powders [Volume 1, Issue 2, 2013, Pages 69-78]
Yousefpour, M.
Chemical surface modification of titanium by acid solution process [Volume 1, Issue 1, 2012, Pages 59-68]
Yushbashi-zadeh, H.
Investigation of Pozzolanic Effect of Micro Silica on light Weight Concretes [Volume 1, Issue 1, 2012, Pages 15-24]
Z
Zanganehmadar, Karim
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
Zareidoost, A.
Chemical surface modification of titanium by acid solution process [Volume 1, Issue 1, 2012, Pages 59-68]